Concrete Flooring Specialists at Your Service

 – This is a multistep process in which different bonded diamonds are used to cut the surface of the concrete by mechanical grinding, honing, and polishing. 

A penetrating sealer is then applied after the polishing is complete.

 – This is a surface polish with no stone exposure.

This finish can be mechanically polished or have a topical sealer applied depending on your budget.

– This is a process where the existing surface, tiles, timber or concrete are prepared and a high strength concrete micro topping is installed over the top at a minimum height of 3mm.

With a number of different finishes available from a burnished finish to desired stone exposure and a range of different colours.

It can then be polished or sealed with a topical or penetrating sealer. Three different gloss levels can be achieved: matte, satin, and gloss.

– This is a level of grinding that produces a smooth and even matte finish. Honed concrete is a perfect flooring solution for outdoor areas.

The area is ground to a desired exposure, and then a penetrative sealer is applied. This is perfect for alfresco entertaining areas and around swimming pools.